GTB-970 Hydraulic Airless Sprayer for Heavy-Duty Coatings

GTB-970 Hydraulic Airless Sprayer: Electric or Gasoline Drive

  • Motor Power
    4000W
  • Max. Tip Size
    0.051″
  • Max. Flow Rate
    12.0 L/min
  • Pump Material
    Single-ceramic
  • Sprays latex paint, general coatings and paints.
  • Supports two-gun operation.
  • Overheat protection.
  • Imported cowhide V-packings give long-lasting wear resistance.

GTB-970 is a hydraulic piston sprayer for heavy-duty coating work: latex paint and general coatings. The family is offered with an electric motor or a gasoline engine, in Standard Pump, Elastomeric and High Pressure configurations; pressure, flow and tip ratings are listed per configuration in the specification table. Every unit uses a single-ceramic fluid section, a ceramic-coated rod in a stainless steel cylinder liner, with imported cowhide V-packings, and supports two-gun operation.

Manufacturer Since 2010

In-House Pump-Body Machining with Brother & Haas CNCs

100% Inspection & Two-Stage Testing

NDA-Backed OEM/ODM Support

Industrial Hydraulic Technology

Gasoline Engine or 4000W Motor, Two-Gun Operation, Overheat Protection

GTB-970 combines a hydraulic plunger pump with a 4000W electric motor or a gasoline engine. Maximum flow rate is 12 L/min on the Standard Pump configuration, 15 L/min on the Elastomeric configuration and 7.5 L/min on the High Pressure configuration.


Overheat Protection, 100% Inspected

Overheat protection built in

Overheat protection is built into every GTB-970 configuration, and working pressure is read on a pressure gauge. Every unit is inspected, not sampled, and runs a 30-minute continuous high-pressure load test before packing. Electric-motor version: CE certified under Machinery Directive 2006/42/EC — Certificate No. B-S200428988 (EN ISO 12100:2010, EN 60204-1:2018). Petrol-engine version: CE certified under Machinery Directive 2006/42/EC — Certificate No. B-S200428990 (EN ISO 12100).

Single-Ceramic Fluid Section

Single-ceramic fluid section

Every GTB-970 uses the Single-Ceramic Version fluid section: a ceramic-coated rod running in a stainless steel cylinder liner, sealed with imported cowhide V-packings. It sprays latex paint, general coatings and paints, and supports two-gun operation. Pump bodies are machined on Japan Brother CNC centers, and every finished unit runs a 30-minute continuous high-pressure load test.

Gasoline Engine or 4000W Motor

Gasoline engine or electric motor

Offered with a gasoline engine or a 4000W electric motor; each drive type carries its own CE certificate. Standard Pump, Elastomeric and High Pressure configurations are available with either drive, and pressure, flow and tip ratings are listed per configuration in the specification table. Every unit is inspected, not sampled, and runs a 30-minute continuous high-pressure load test before packing.

Material Compatibility of the GTB-970 Hydraulic Piston Sprayer

Whether a coating can be sprayed depends on the spray tip orifice size, flow rate and pressure, together with the viscosity of the coating. Pressure, flow and tip ratings are listed per configuration in the specification table. For any specific coating, follow the coating manufacturer’s technical data sheet (TDS).

Supported Materials

All configurations

✅ Interior / exterior latex paint (flat / eggshell / satin / semi-gloss)

✅ Acrylic wall paint / emulsion

✅ Water-based enamel

✅ Waterborne wood stain (solid & semi-transparent)

✅ Water-based clear coat / sealer / topcoat

✅ Water-based primer & PVA drywall sealer

✅ Acrylic / waterborne lacquer

✅ Chalk-type paint / milk paint

🔸 Oil-based / alkyd enamel & topcoat (conditional: tip size per the coating manufacturer’s TDS, no larger than one size below the maximum tip size of the configuration in use; solvent-borne: flammable-material safety precautions required)

🔸 Oil-based primer & wood sealer (conditional: tip size per the coating manufacturer’s TDS, no larger than one size below the maximum tip size of the configuration in use; solvent-borne: flammable-material safety precautions required)

🔸 Oil-based & penetrating wood stain (conditional: tip size per the coating manufacturer’s TDS, no larger than one size below the maximum tip size of the configuration in use; solvent-borne: flammable-material safety precautions required)

🔸 Lacquer (nitrocellulose / cellulose / pre-catalyzed / catalyzed) (conditional: tip size per the coating manufacturer’s TDS, no larger than one size below the maximum tip size of the configuration in use; solvent-borne: flammable-material safety precautions required)

🔸 Varnish & polyurethane / urethane topcoat (conditional: tip size per the coating manufacturer’s TDS, no larger than one size below the maximum tip size of the configuration in use; solvent-borne: flammable-material safety precautions required)

🔸 Shellac (conditional: tip size per the coating manufacturer’s TDS, no larger than one size below the maximum tip size of the configuration in use; solvent-borne: flammable-material safety precautions required)

🔸 Basecoat / clearcoat system (conditional: tip size per the coating manufacturer’s TDS, no larger than one size below the maximum tip size of the configuration in use; solvent-borne: flammable-material safety precautions required)

🔸 Light-build direct-to-metal (DTM) coating (conditional: tip size per the coating manufacturer’s TDS, no larger than one size below the maximum tip size of the configuration in use; solvent-borne: flammable-material safety precautions required)

🔸 Light-build / thinned epoxy coating (conditional: tip size per the coating manufacturer’s TDS, no larger than one size below the maximum tip size of the configuration in use; solvent-borne: flammable-material safety precautions required)

🔸 Anti-corrosive primer (conditional: per the coating manufacturer’s TDS; solvent-borne: flammable-material safety precautions required; two-component: pre-mixed by the customer)

🔸 Zinc-rich primer (conditional: per the coating manufacturer’s TDS)

Standard Pump and Elastomeric configurations

✅ Block filler

✅ Dry-fall coating

✅ Elastomeric coating (standard-build)

✅ Heavy-aggregate elastomeric coating (per the coating manufacturer’s TDS; TDS tip size 0.049″ or smaller)

🔸 Drywall mud / joint compound (conditional: requires a texture gun and a large-bore hose)

🔸 Airless-grade spray filler (conditional: requires a texture gun and a large-bore hose)

🔸 Putty / skim-coat compound (conditional: requires a texture gun and a large-bore hose)

🔸 Epoxy coating (conditional: per the coating manufacturer’s TDS; solvent-borne: flammable-material safety precautions required; two-component: pre-mixed by the customer)

🔸 Micaceous iron oxide (MIO) primer (conditional: per the coating manufacturer’s TDS)

🔸 Thin-film intumescent coating / fire-retardant paint (conditional: per the coating manufacturer’s TDS)

🔸 Bitumen / asphalt coating (conditional: per the coating manufacturer’s TDS; TDS tip size 0.049″ or smaller; solvent-borne bitumen: flammable-material safety precautions required)

🔸 Asphalt emulsion (conditional: per the coating manufacturer’s TDS; TDS tip size 0.049″ or smaller on the Standard Pump configuration, 0.053″ or smaller on the Elastomeric configuration; solvent-borne bitumen: flammable-material safety precautions required)

🔸 Waterproofing membrane (liquid-applied) (conditional: per the coating manufacturer’s TDS; TDS tip size 0.049″ or smaller on the Standard Pump configuration, 0.053″ or smaller on the Elastomeric configuration; solvent-borne bitumen: flammable-material safety precautions required)

Elastomeric configuration only

🔸 Elastomeric roof coating (conditional: per the coating manufacturer’s TDS; TDS tip size 0.053″ or smaller)

🔸 Mastic coating (conditional: per the coating manufacturer’s TDS; TDS tip size 0.053″ or smaller)

🔸 Aluminum emulsion coating (conditional: per the coating manufacturer’s TDS; TDS tip size 0.053″ or smaller)

High Pressure configuration

Supplied as standard without spray gun, hose or spray tip; a spray tip fitted by the customer must not exceed 0.029″.

🔸 High-solids protective coating (high-solids epoxy / polyurethane protective coating) (conditional: per the coating manufacturer’s TDS; TDS tip size 0.027″ or smaller; solvent-borne: flammable-material safety precautions required; two-component: pre-mixed by the customer)

🔸 100%-solids epoxy (conditional: single-component, or two-component pre-mixed by the customer)

🔸 Elastomeric coating (thin-build) (conditional: per the coating manufacturer’s TDS; TDS tip size 0.027″ or smaller)

Not Recommended

All configurations

❌ Stone-texture coating / cementitious fireproofing (SFRM) / lightweight & insulation mortar / gypsum plaster / 100%-solids epoxy passive fire protection (PFP) / polyurea

❌ Halogenated hydrocarbons (e.g. methylene chloride): react violently with aluminum components

❌ Spraying in hazardous locations (explosive gas atmospheres)

Standard Pump and Elastomeric configurations

❌ 100%-solids epoxy

❌ Intumescent coating other than thin-film intumescent coating

❌ Textured / knockdown coating

Standard Pump configuration only

❌ Elastomeric roof coating

❌ Mastic coating

High Pressure configuration

❌ Block filler

❌ Dry-fall coating

❌ Elastomeric coating (standard-build / high-build)

❌ Heavy-aggregate elastomeric coating

❌ Elastomeric roof coating

❌ Mastic coating

❌ Bitumen / asphalt coating

❌ Asphalt emulsion

❌ Aluminum emulsion coating

❌ Waterproof coating, including waterproofing membrane (liquid-applied)

❌ Thin-film intumescent coating / fire-retardant paint

❌ Intumescent coating other than thin-film intumescent coating

❌ Drywall mud / joint compound

❌ Airless-grade spray filler

❌ Putty / skim-coat compound

❌ Textured / knockdown coating

Current (Standard Pump): High (Block Filler / Elastomeric Coating)
Light (Stains)Medium (Latex)Extreme (Putty/Bitumen)

💡 Factory Pro Tip:

Supports two-gun operation. Do not spray the materials listed under Not Recommended.

Internal Engineering

Why Choose the GTB-970 Airless Sprayer

Single-gun or two-gun airless spraying of interior and exterior latex paint, acrylic wall paint and emulsion, water-based enamel, waterborne wood stain and water-based primer. The Standard Pump and Elastomeric configurations also spray block filler, dry-fall coating and elastomeric coating (standard-build).

The GTB-970 is a hydraulic plunger sprayer offered with an electric motor or a gasoline engine, in Standard Pump, Elastomeric and High Pressure configurations. It sprays latex paint, general coatings and paints. Pump body, motor and control PCB are made 100% in-house. Pump bodies, aluminum housings and filters are machined on Japan Brother CNC centers; connecting rods, pistons and plunger bores on USA Haas CNC centers. Concentricity is checked on a Carl Zeiss CMM; ±0.01 mm tolerance applies only to critical machined metal mating surfaces.

Hydraulic Plunger Drive

The GTB-970 is a hydraulic plunger sprayer, offered with an electric motor or a gasoline engine. Working pressure is read on a pressure gauge, and the family supports two-gun operation.

Electric or Gasoline Drive

Two drive types are offered: a 4000W electric motor or a gasoline engine, each with its own CE certificate. Overheat protection is built into every configuration.

Single-Ceramic Version Pump

Single-Ceramic Version fluid section: a ceramic-coated rod in a stainless steel cylinder liner, sealed with imported cowhide V-packings. Sprays latex paint, general coatings and paints.

* Direct form manufacturer.

Genuine USA Haas CNC machining centers manufacturing precision core components for heavy-duty hydraulic airless paint sprayers.

GTB-970 Technical Specifications

Compare the electric-motor and gasoline-engine drive options across the GTB-970 configurations.

GTB-970-STD-E GTB-970-LGP-E GTB-970-STD-G GTB-970-LGP-G GTB-970-HP-E GTB-970-HP-G
Model No. GTB-970 GTB-970 GTB-970 GTB-970 GTB-970 GTB-970
Max. Tip Size 0.051 0.055 0.051 0.055 0.029 0.029
Max. Flow Rate 12 15 12 15 7.5 7.5
Max. Guns Supported 2 2 2 2 2 2
Max. Working Pressure 3600 3600 3600 3600 6500 6500
Power Source Electric Electric Honda Gasoline Honda Gasoline Electric Honda Gasoline
Motor Power 4000W 4000W 4000W
Fuel / Engine Type Honda Gasoline Honda Gasoline Honda Gasoline
Voltage 220V/380V 380V 220V/380V
Pump Material Single-ceramic Single-ceramic Single-ceramic Single-ceramic Single-ceramic Single-ceramic

What’s in the Box

GTB-970-STD-E / GTB-970-STD-G / GTB-970-LGP-E / GTB-970-LGP-G GTB-970-HP-E / GTB-970-HP-G
high-pressure fluid hose 15M 3/8 1
airless spray gun 1
spray tip 343 1
suction hose assembly 1 1
drain tube 1 1
suction hose filter screen 1 1
Piston rod lubricant 1 1
instruction manual 1 1

OEM/ODM MANUFACTURING

GUTUBAO manufactures core components in-house, including pump bodies, motors, and smart PCBs, with NDA-backed OEM/ODM support.

200+ CNC MACHINING EQUIPMENT

110+ employees, including 30+ R&D staff, supported by more than 200 CNC processing machines.

PRECISION MACHINING & INSPECTION

Carl Zeiss CMM, Mitutoyo projection and surface-roughness instruments support dimensional inspection. An Olympus handheld XRF analyzer checks the composition of incoming raw materials. Specified critical machined metal mating surfaces are controlled to ±0.01 mm geometric tolerance.

100% FINISHED-UNIT INSPECTION

Every finished unit undergoes inspection and a 30-minute continuous high-pressure load test before shipment. PCB assemblies undergo a separate 4-hour powered aging test.

Airless Sprayer Wholesale & Dealer FAQs

Everything you need to know about importing, strategic OEM services, and our lab-grade quality control processes.

Is the GTB-970 electric or gasoline powered?

Both. The GTB-970 is offered with an electric motor or a gasoline engine, and each drive type carries its own CE certificate (see below). Choose the drive by the power available on site.

What configurations does the GTB-970 family cover?

Three: Standard Pump, Elastomeric and High Pressure configurations, each available with electric or gasoline drive. Pressure, flow and tip ratings differ by configuration, so refer to the specification table for the exact figures of the unit you are quoting.

Can two painters run off one GTB-970?

Yes. The GTB-970 supports two-gun operation; the factory rating is a maximum of two guns per machine.

What pump material does the GTB-970 use?

Every GTB-970 is the Single-Ceramic Version: a ceramic-coated rod running in a stainless steel cylinder liner. Imported cowhide V-packings are fitted.

Is the GTB-970 CE certified?

Yes, by drive type. Electric-motor versions are CE certified under Machinery Directive 2006/42/EC — Certificate No. B-S200428988 (EN ISO 12100:2010, EN 60204-1:2018). Gasoline-engine versions are CE certified under Machinery Directive 2006/42/EC — Certificate No. B-S200428990 (EN ISO 12100).

GuTuBao two-stage quality control platform featuring 4-hour PCB aging and 30-minute high-pressure load tests for airless paint sprayers, ensuring reliable OEM contract manufacturing.
  • ZERO DEFECT COMMITMENT

Two-Stage Rigorous Testing

Mandatory 4-hour PCB electronic aging and a 30-minute high-pressure load test for every single unit.

Strategic OEM Partner

Delivering industrial-grade precision and exclusive private labeling, protected by strict NDAs.

Partner with the Source Factory

In-house USA Haas CNC center machining connecting rods with sub-micron precision at GuTuBao factory.

100% Self-Manufactured Core Components

Ensuring unparalleled quality and control over every part.

Processed by USA Haas Machines

Industrial-grade precision from world-class American technology.

Verified by German Zeiss CMM

Micro-precision inspection guaranteed by German metrology.

USA Machines + German Inspection + Chinese Efficiency = GuTuBao Quality